E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

OMV Orbital motors

Where can I find the product ID?
Spare parts for OMV Orbital motors
Spare parts for OMV Orbital motors
Default view
View parameters
ID 151B3100

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 410 Kč excl. VAT 47 686 Kč incl. VAT
ID 151B3287

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 410 Kč excl. VAT 47 686 Kč incl. VAT
ID 151B3101

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
42 530 Kč excl. VAT 51 461 Kč incl. VAT
ID 151B3106

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
43 050 Kč excl. VAT 52 091 Kč incl. VAT
ID 151B3111

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
42 530 Kč excl. VAT 51 461 Kč incl. VAT
ID 151B3102

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
46 800 Kč excl. VAT 56 628 Kč incl. VAT
ID 151B3107

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
47 320 Kč excl. VAT 57 257 Kč incl. VAT
ID 151B3112

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
46 800 Kč excl. VAT 56 628 Kč incl. VAT
ID 11090116

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
59 040 Kč excl. VAT 71 438 Kč incl. VAT
ID 151B3104

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
56 120 Kč excl. VAT 67 905 Kč incl. VAT
ID 151B3256

In stock
  • Basic motor
    OMV HD
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    A4 Standard
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0162
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
45 495 Kč excl. VAT 55 049 Kč incl. VAT
ID 151B3129

In stock
  • Basic motor
    OMVS
  • Series
    O-series
  • Displacement
    800 cm³
  • Mounting thread dimension
    Pilot dia. 139,9 x 8 mm - B.C. dia. 180 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Seal kit product ID
    151B0125
  • Front bearing
    No bearing
  • Rear bearing
    No bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
38 865 Kč excl. VAT 47 027 Kč incl. VAT
ID 11215953

In stock
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - turned
35 306 Kč excl. VAT 42 720 Kč incl. VAT
ID 151B0162

In stock
  • Motor type
    OMV, OMV HD
2 162 Kč excl. VAT 2 616 Kč incl. VAT
ID 151B0127

In stock
  • Motor type
    OMV, OMVW
1 659 Kč excl. VAT 2 007 Kč incl. VAT
ID 151B0129

In stock
  • Motor type
    OMV, OMVW
1 023 Kč excl. VAT 1 238 Kč incl. VAT
ID 151B1114

In stock
  • Motor type
    OMV HD
2 560 Kč excl. VAT 3 098 Kč incl. VAT
ID 151B0125

In stock
  • Motor type
    OMVS
754 Kč excl. VAT 912 Kč incl. VAT
ID 11083282

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
44 270 Kč excl. VAT 53 567 Kč incl. VAT
ID 11124402

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - spec surface roughness
42 790 Kč excl. VAT 51 776 Kč incl. VAT
ID 11139888

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151B0127
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Balance plate - with viton O-rings
40 310 Kč excl. VAT 48 775 Kč incl. VAT
ID 11159874

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
55 290 Kč excl. VAT 66 901 Kč incl. VAT
ID 11197427

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151B0127
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
40 830 Kč excl. VAT 49 404 Kč incl. VAT
ID 11225105

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
39 410 Kč excl. VAT 47 686 Kč incl. VAT
ID 11232394

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
40 130 Kč excl. VAT 48 557 Kč incl. VAT
ID 151B2150

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 410 Kč excl. VAT 47 686 Kč incl. VAT
ID 151B2155

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 920 Kč excl. VAT 48 303 Kč incl. VAT
ID 151B2160

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 2-1/4" - 1 1/2-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    9/16 x 9/16 x 2" (SAE J501)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
40 860 Kč excl. VAT 49 441 Kč incl. VAT
ID 151B2183

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
42 320 Kč excl. VAT 51 207 Kč incl. VAT
ID 151B2188

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
42 840 Kč excl. VAT 51 836 Kč incl. VAT
ID 151B3105

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 920 Kč excl. VAT 48 303 Kč incl. VAT
ID 151B3110

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
39 410 Kč excl. VAT 47 686 Kč incl. VAT

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.