• ID11178657
  • Manufacturer Danfoss
  • Mounting flange 4 Bolt - Square
  • Shaft style Straight
  • Shaft size Dia. 40 mm - M12 tap
  • Mounting thread dimension Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Displacement 250 cm³
Powerful and reliable TMT orbital hydraulic motor manufactured by Danfoss for use in open loop or closed loop hydraulic system.
On request Farthest delivery date: 24.10.2024
1 192,05 € excl. VAT 1 442,38 € incl. VAT
pc
Check delivery date

The product delivery date can range from one week to several months. Please contact us to confirm delivery date for this specific product.

Need help?

Product description

Powerful and reliable TMT orbital hydraulic motor manufactured by Danfoss for use in open loop or closed loop hydraulic system. Energy-efficient motor designed for particularly rough operating conditions.

TMT orbital motors are known for their flexible use in wide range of applications. Additionally, they offer constant torque over a wide speed range and good efficiency even at low speed.

TMT MAIN FEATURES/strong>

  • Displacement 250-630 cm³
  • Max. continuous pressure 250 bar
  • Max. continuous torque 1830 Nm
  • Max. continuous flow 125 l/min
  • Available with speed sensor
  • Compact dimensions and high power

Details

Basic motor TMT
Series T-series
Displacement 250 cm³
Shaft style Straight
Shaft size Dia. 40 mm - M12 tap
Mounting thread dimension Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
Mounting flange 4 Bolt - Square
Shaft key A12 x 8 x 70 mm
Port style Side ported - offset manifold (5 x M10)
Port dimension G 3/4
Drain port style Standard - motor flange
Drain port dimension G 1/4
Dust seal Standard
Shaft seal NBR - High pressure
Seal kit product ID 151B0176
Front bearing Tapered roller bearing
Rear bearing Tapered roller bearing
Gear wheel set Standard
Check valve No
Special features external 1 Motor flange - hole for speed sensor
Special features internal 1 Nut - 28 pulses per rev.
Weight (brutto) 23300 g
Recently
viewed
ID 11178657

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features internal 1
    Nut - 28 pulses per rev.
1 192,05 € excl. VAT