Product discontinued – replacement available
Replacement for Orbital motor OMR 50
Orbital motor OMR X 50
Orbital motor OMR X 50 Product ID: 11185558
In stock
Price upon request excl. VAT
This product is a fully adequate replacement of the discontinued product. It has identical parameters, which means that these products are interchangeable.
Need help?

Product description

Danfoss OMR orbital hydraulic motor. This motor is not in production anymore and has been replaced by a motor from the OMR X series manufactured by White Drive Motors & Steering. Please continue to related replacement.

Details

Displacement 50 cm³
Basic motor OMR
Replaced by 11185558
Recently
viewed
Replaced
ID 151-0700

Product discontinued
  • Basic motor
    OMR
  • Displacement
    50 cm³
  • Replaced by
    11185558
ID 11182619

On request
  • Symmetric flow
    Yes
  • A to T flow rate
    240 l/min
  • P to A flow rate
    240 l/min
  • B to T flow rate
    240 l/min
  • P to B flow rate
    240 l/min
  • Function in neutral position A
    Open
  • Function in neutral position B
    Open
  • Spool control type A
    Flow control
  • Spool control type B
    Flow control
  • Spool deadband
    1,7 mm
  • Hydraulic activation
    No
  • Spool characteristic
    Progressive
  • PVG type
    PVG 128/256
  • Float position
    No
  • Related documents
    BC00000980en-US0201
Price upon request excl. VAT
Inquire
ID 11197988

On request
  • Screen size
    4,3 ”
  • Resolution
    480 x 272 px
  • Touch screen
    No
  • Audio out
    No
  • Aspect ratio
    16:9 widescreen
  • Number of keys
    4 + navigation buttons
  • Ambient light sensor
    Yes
  • CAN ports
    2
  • Digital and analog inputs
    2
  • Configurable inputs
    2
  • USB
    Yes
  • Ethernet
    No
  • EIC (Engine Information Center) installed
    Yes
  • Processor
    ARM Cortex-M7
  • Color depth
    24 bit
  • Brightness
    700 cd/m²
  • Contrast ratio
    500:1
  • Viewing angle
    ±70°
  • Supply voltage
    9 - 36 V DC
  • RAM
    32 MB
  • Video outputs
    0
  • Operating temperature
    -30°C to +70°C
  • Connector type
    Deutsch DTM06-12 and M12 8-pin
  • IP rating
    IP66 front and IP67 back side
  • Wi-Fi/Bluetooth/GNSS
    No
702,19 € excl. VAT
ID 11018140

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 2-1/4" - 1 1/2-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    9/16 x 9/16 x 2" (SAE J501)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 371,45 € excl. VAT
ID 11134635

On request
  • Friction detent
    No
  • Mechanical float detent
    No
  • Actuation type
    PVH/C
  • Float function
    Yes
  • Neutral position A port
    Closed
  • Neutral position B port
    Closed
  • Spool type
    PVB/Z
  • Spool type
    PVBS
  • Symmetric flow
    Yes
  • A to T flow rate
    40 l/min
  • P to A flow rate
    40 l/min
  • B to T flow rate
    40 l/min
  • P to B flow rate
    40 l/min
  • Spool control type A
    Flow control
  • Spool control type B
    Flow control
  • Spool deadband
    1,5 mm
  • PVM type
    Yes
  • Option mount
    Yes
  • Regeneration function
    No
  • Spool characteristic
    Progressive
  • PVG type
    PVG 100
  • Related documents
    520L0720
Price upon request excl. VAT
Inquire
ID 11214031

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11186196

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185573

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
Replaced
ID 151-2314

Product discontinued
  • Basic motor
    DS
  • Displacement
    125 cm³
  • Replaced by
    11186151
ID 150-7167

On request
  • Circuit type
    LS
  • P - T - L - R port size
    3/4"-16 UNF O-ring
  • LS - EL - E port size
    7/16-20 UNF O-ring D=21 placed in boss
  • Column thread size
    M10x1.5
  • Valve set
    (---,---,-,-)
  • Housing product ID
    150-1510
  • Spool sleeve set product ID
    150-7480
  • Spool sleeve set comments
    Static, 15°
  • Neutral spring set product ID
    150-4207
  • Series
    OSPL
  • Displacement
    520 cm³
Price upon request excl. VAT
Inquire