• ID11159593
  • Manufacturer Danfoss
  • Maximum current, sourcing 24 A
  • Number of pins 24
  • Number of outputs 8
  • Number of inputs 8
Danfoss controller designed for use within the CAN-based PLUS+1® software platform. The main advantages include rugged design and easy programmability using PLUS+1® GUIDE app to meet specific requirements. PLEASE NOTE: The controller is delivered as hardware only with no working software.
On request Farthest delivery date: 6.6.2025
718,53 € excl. VAT 869,42 € incl. VAT
pc
Check delivery date

The product delivery date can range from one week to several months. Please contact us to confirm delivery date for this specific product.

Need help?

Product description

Danfoss SC controller designed for use within the CAN-based PLUS+1® software platform. The main advantages include rugged design and easy programmability using PLUS+1® GUIDE app to meet specific requirements.

PLEASE NOTE: The controller is delivered as hardware only with no working software.

Flexible, powerful and functional safety compliant SC controllers join the portfolio of PLUS+1® compliant components. Dual microprocessors provide enhanced performance, larger memory, and redundant control of outputs for safety function applications.

MAIN FEATURES

  • Larger memory capacity
  • Higher environmental performance
  • Enhanced input/output flexibility
  • Smart digital inputs
  • Increased operating temperature
  • PWM output frequency increase to 20,000 Hz
  • Separate PWM frequencies for each output
  • Configurable sensor power from 3 to 12 volt
  • Low power mode
  • Low supply voltage (7 volts) stays running through engine crank

Details

Maximum current, sourcing 24 A
Number of pins 24
Number of outputs 8
Number of inputs 8
Flash memory 512K primary, 128K secondary
FRAM No
Application key Yes
Maximum current, sinking 8 A
CAN ports 1
Supply voltage 7 - 36 V DC
Operating temperature -40°C to +85°C
IP rating IP67
Weight (brutto) 400 g
Recently
viewed
ID 11159593

On request
  • Number of pins
    24
  • Number of inputs
    8
  • Number of outputs
    8
  • Flash memory
    512K primary, 128K secondary
  • FRAM
    No
  • Application key
    Yes
  • Maximum current, sourcing
    24 A
  • Maximum current, sinking
    8 A
  • CAN ports
    1
  • Supply voltage
    7 - 36 V DC
  • Operating temperature
    -40°C to +85°C
  • IP rating
    IP67
718,53 € excl. VAT
ID 151Z3277

On request
  • Basic motor
    TMTW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Displacement
    500 cm³
  • Mounting thread dimension
    Pilot dia. 180 x 5 mm / 180 x 5 mm - B.C. dia. 210 mm - Dia. 14,2 mm
  • Mounting flange
    10 Bolt - Wheel
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    PU - ring
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11112380
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Painted
    Black
3 498,87 € excl. VAT
ID 151G2024

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Díra 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11269810

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Speed sensor
    No
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 11123267

On request
  • Basic motor
    TMTW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Displacement
    500 cm³
  • Mounting thread dimension
    Pilot dia. 180 x 5 mm / 180 x 5 mm - B.C. dia. 210 mm - Dia. 14,2 mm
  • Mounting flange
    10 Bolt - Wheel
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    PU - ring
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11112380
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
  • Special features internal 1
    Motor flange - strengthened material
  • Special features internal 2
    Shaft seal 72 NBR
3 630,06 € excl. VAT
ID 11123265

On request
  • Basic motor
    TMTW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Displacement
    315 cm³
  • Mounting thread dimension
    Pilot dia. 180 x 5 mm / 180 x 5 mm - B.C. dia. 210 mm - Dia. 14,2 mm
  • Mounting flange
    10 Bolt - Wheel
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    PU - ring
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11112380
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
  • Special features internal 1
    Motor flange - strengthened material
  • Special features internal 2
    Shaft seal 72 NBR
3 198,51 € excl. VAT
ID 11115900

On request
  • Basic motor
    TMTW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Displacement
    315 cm³
  • Mounting thread dimension
    Pilot dia. 180 x 5 mm / 180 x 5 mm - B.C. dia. 210 mm - Dia. 14,2 mm
  • Mounting flange
    10 Bolt - Wheel
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    PU - ring
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11112380
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
  • Special features internal 1
    Motor flange - strengthened material
  • Special features internal 2
    Shaft seal 72 NBR
3 198,51 € excl. VAT
To deliver a personalized services and ads, as well as analyze the traffic, this website uses cookies. By browsing this website, you agree with our cookies policy.