Product discontinued – replacement available
Replacement for Orbital motor DH 100
Orbital motor OMP X 100
Orbital motor OMP X 100 Product ID: 11186093
On request
Price upon request excl. VAT
This product is a fully adequate replacement of the discontinued product. It has identical parameters, which means that these products are interchangeable.
Need help?

Product description

Danfoss DH orbital hydraulic motor. This motor is not in production anymore and has been replaced by a motor from the OMP X series manufactured by White Drive Motors & Steering. Please continue to related replacement.

Details

Displacement 100 cm³
Basic motor DH
Replaced by 11186093
Recently
viewed
Replaced
ID 151-2023

Product discontinued
  • Basic motor
    DH
  • Displacement
    100 cm³
  • Replaced by
    11186093
ID 11185461

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID WAL372416

In stock
  • Pressure series
    S
  • Size
    20S
  • Material
    Steel
0,54 € excl. VAT
ID WAL372408

In stock
  • Pressure series
    L
  • Size
    15L
  • Material
    Steel
0,28 € excl. VAT
ID EC215-04L

In stock
  • Inner diameter
    6,4 mm
  • Outer diameter (max)
    14,2 mm
  • Maximum operating pressure
    400 bar
  • Minimum bend radius
    50 mm
  • Number of steel braids
    2
  • Operating temperature
    -40°C to +100°C
  • Weight
    0,28 kg/m
4,92 € excl. VAT
ID GH681-10MT50

In stock
  • Inner diameter
    15,9 mm
  • Outer diameter (max)
    23 mm
  • Maximum operating pressure
    140 bar
  • Minimum bend radius
    100 mm
  • Number of steel braids
    1
  • Operating temperature
    -46°C to +127°C
  • Weight
    0,42 kg/m
8,75 € excl. VAT
ID 19FFS100BS

On request
  • Size
  • Coupling size
    G1" BSP
  • Type
    Flat Face
  • Version
    Female
  • Series
    FF
131,61 € excl. VAT
ID 470762103

On request
  • Series
    AC F2-A
  • Motor type
    AC, PMAC
  • Maximum current (S2 - 60 minutes)
    40 Arms
  • Maximum current (S2 - 2 minutes)
    120 Arms
  • Internal 120Ω CAN termination
    Without resistor
  • Nominal voltage
    24 V
  • Minimum voltage
    12 V
  • Maximum voltage
    30 V
  • Dimensions
    120mm x 155mm x 53mm
  • Operating temperature
    -40°C to +50°C
  • IP rating
    IP65/IP67
326,80 € excl. VAT
ID 036-0524-003

On request
  • Basic motor
    XLS
  • Series
    Xcel
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,6 x 5 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port dimension
    G 1/4
  • Shaft seal
    NBR - Standard
  • Painted
    Black
186,15 € excl. VAT
Replaced
ID 151-2123

Product discontinued
  • Basic motor
    DH
  • Displacement
    100 cm³
  • Replaced by
    11186134