Product discontinued – replacement available
Replacement for Orbital motor DH 100
Orbital motor OMP X 100
Orbital motor OMP X 100 Product ID: 11186073
On request
Price upon request excl. VAT
This product is a fully adequate replacement of the discontinued product. It has identical parameters, which means that these products are interchangeable.
Need help?

Product description

Danfoss DH orbital hydraulic motor. This motor is not in production anymore and has been replaced by a motor from the OMP X series manufactured by White Drive Motors & Steering. Please continue to related replacement.

Details

Displacement 100 cm³
Basic motor DH
Replaced by 11186073
Recently
viewed
Replaced
ID 151-2013

Product discontinued
  • Basic motor
    DH
  • Displacement
    100 cm³
  • Replaced by
    11186073
ID 83094811

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 28,5 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    B5 x 5 x 14 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    ISO 6149-1, M22 x 1,5
  • Drain port style
    Standard - end cover
  • Drain port dimension
    M12 x 1,5
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186118

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186076

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire