E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 151Z3296

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features external 2
    Valve housing - with M10 threads
  • Special features internal 1
    Nut - 28 pulses per rev.
1 232,34 € excl. VAT
ID 11015548

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
1 232,29 € excl. VAT
ID 151B2095

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 21T
  • Shaft size
    Dia. 1-1/3" tap
  • Mounting thread dimension
    Pilot dia. 160 x 8,3 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Output shaft - longer
  • Special features external 2
    Bearing housing - larger mounting holes
  • Special features internal 1
    Balance plate - with back-up rings
1 225,07 € excl. VAT
ID 151B3023

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 214,32 € excl. VAT
ID 11009376

In stock
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 204,43 € excl. VAT
ID 11076088

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
1 197,34 € excl. VAT
ID 151Z3263

In stock
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
1 197,34 € excl. VAT
ID 11111075

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
1 192,69 € excl. VAT
ID 11178657

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features internal 1
    Nut - 28 pulses per rev.
1 192,05 € excl. VAT
ID 11114878

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
1 191,96 € excl. VAT
ID 151Z3030

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 191,23 € excl. VAT
ID 151Z3036

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 191,23 € excl. VAT
ID 151Z3080

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-3/4" - 1 1/4-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,1 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    7/16 x 7/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 191,23 € excl. VAT
ID 11036667

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
  • Special features external 2
    Output shaft - shorter
1 187,66 € excl. VAT
ID 11176264

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Low pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Shaft seal 72 NBR
1 187,23 € excl. VAT
ID 11144920

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
1 185,94 € excl. VAT
ID 11229363

On request
  • Basic motor
    OMVS
  • Series
    O-series
  • Displacement
    400 cm³
  • Mounting thread dimension
    Pilot dia. 139,9 x 8 mm - B.C. dia. 180 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Seal kit product ID
    151B0125
  • Front bearing
    No bearing
  • Rear bearing
    No bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
1 185,77 € excl. VAT
ID 151Z3026

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 179,79 € excl. VAT
ID 11165036

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
1 174,33 € excl. VAT
ID 11224739

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
1 172,18 € excl. VAT
ID 151B0413

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
1 172,18 € excl. VAT
ID 151B2061

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 172,18 € excl. VAT
ID 151B3011

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 172,18 € excl. VAT
ID 151B3126

On request
  • Basic motor
    OMVS
  • Series
    O-series
  • Displacement
    400 cm³
  • Mounting thread dimension
    Pilot dia. 139,9 x 8 mm - B.C. dia. 180 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Seal kit product ID
    151B0125
  • Front bearing
    No bearing
  • Rear bearing
    No bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 171,32 € excl. VAT
ID 11223776

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,1 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Output shaft - shorter
1 171,28 € excl. VAT
ID 151Z3020

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 171,28 € excl. VAT
ID 151Z3070

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,1 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 171,28 € excl. VAT
ID 151B2067

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-3/4" - 1 1/4-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    7/16 x 7/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 162,72 € excl. VAT
ID 11152839

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 158,85 € excl. VAT
ID 151B2055

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 158,85 € excl. VAT
ID 11037811

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
1 155,84 € excl. VAT
ID 151B2048

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Splined - 21T
  • Shaft size
    Dia. 1-1/3" tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0161
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Output shaft - longer
  • Special features external 2
    Bearing housing - larger mounting holes
1 153,69 € excl. VAT

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.