Do you need to replace a faulty component in the hydraulic system of your machine? Then you are in the right place! We have been in the market of hydraulics and hydraulic products for more than thirty years.

Our offer includes hydraulic directional control valves, hydraulic pumps, hydraulic motors and other components of the hydraulic system. We are the only certified distributor of the Danish manufacturer Danfoss Power Solutions in the Czech Republic and Slovakia, but we also represent other hydraulic components manufacturers and brands, such as White Drive Motors & Steering, a manufacturer of selected orbital hydraulic motors and hydraulic steering that were formerly produced by Danfoss.

In our extensive warehouse near Litovel, Czech Republic, we have more than 5,000 products ready for immediate delivery and our stock of hydraulic parts is constantly expanding. At the same time, we are part of a large European network of suppliers, which means that we are able to supply products that you will not find in our e-shop, including products of manufacturers that we do not represent.

Our experienced and trained team of hydraulics experts will gladly help you select the right product or component so that the hydraulic system of your machine works exactly as it should. Similarly, we will quickly check the availability and delivery time of goods that are currently not in stock.

In addition to distributing hydraulic parts, we also have long-term experience with designing complete system solutions for machines. Therefore, we can also advise you on assembling components into a larger working unit, from hydraulics and fluid conveyance to electronics and control software and even full machine electrification or hybrid drive system.

Default view
View parameters
ID 83063010

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83070968

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 11,5 [0.433"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83079352

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 83083308

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
  • Special features internal 1
    Motor - rotation CCW
Price upon request excl. VAT
Inquire
ID 83086459

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83094126

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 83095226

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83095924

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83096085

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185710

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185722

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185773

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Grey - RAL 7015
  • Special features external 1
    Label - customer designed
Price upon request excl. VAT
Inquire
ID 11185805

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11185831

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1 " - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11186054

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186060

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186069

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186085

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186091

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186094

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8 " tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186099

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
  • Special features external 1
    Output shaft - longer
Price upon request excl. VAT
Inquire
ID 11186115

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186122

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 11,5 [0.433"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186131

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186135

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186137

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 1 " tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186717

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11186729

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186738

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1 " - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186816

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11192764

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 11,5 [0.433"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11193043

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire