E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11209352

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209367

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11209368

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209369

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    69 bar [1000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209370

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    81 bar [1180 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209371

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11209372

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209373

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11209374

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209375

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar [3000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11211987

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11211988

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    81 bar [1180 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11211989

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    173 bar [2500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212139

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11212140

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212293

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212294

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214224

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214225

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214228

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214229

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214231

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214234

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214235

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214236

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214237

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214238

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214239

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214240

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214241

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214242

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214243

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.