Default view
View parameters
ID 11206704

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206705

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar (3000 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206706

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206707

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206708

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11206709

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206710

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206711

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206712

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206713

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206714

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    8 x 8 x 32 mm
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206715

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206716

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206717

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11206718

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206719

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206720

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206721

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11208994

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210528

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11210529

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11210530

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210531

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210532

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210533

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11210534

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210535

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210536

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210537

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11210538

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210539

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11212023

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire