Do you need to replace a faulty component in the hydraulic system of your machine? Then you are in the right place! We have been in the market of hydraulics and hydraulic products for more than thirty years.

Our offer includes hydraulic directional control valves, hydraulic pumps, hydraulic motors and other components of the hydraulic system. We are the only certified distributor of the Danish manufacturer Danfoss Power Solutions in the Czech Republic and Slovakia, but we also represent other hydraulic components manufacturers and brands, such as White Drive Motors & Steering, a manufacturer of selected orbital hydraulic motors and hydraulic steering that were formerly produced by Danfoss.

In our extensive warehouse near Litovel, Czech Republic, we have more than 5,000 products ready for immediate delivery and our stock of hydraulic parts is constantly expanding. At the same time, we are part of a large European network of suppliers, which means that we are able to supply products that you will not find in our e-shop, including products of manufacturers that we do not represent.

Our experienced and trained team of hydraulics experts will gladly help you select the right product or component so that the hydraulic system of your machine works exactly as it should. Similarly, we will quickly check the availability and delivery time of goods that are currently not in stock.

In addition to distributing hydraulic parts, we also have long-term experience with designing complete system solutions for machines. Therefore, we can also advise you on assembling components into a larger working unit, from hydraulics and fluid conveyance to electronics and control software and even full machine electrification or hybrid drive system.

Default view
View parameters
ID 11178741

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186013

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151F0109
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11188140

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11189523

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11197180

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11202954

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11229868

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
Price upon request excl. VAT
Inquire
ID 11232412

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11233095

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 11,6 mm
  • Mounting flange
    4 Bolt - Special
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11235012

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
Price upon request excl. VAT
Inquire
ID 11239102

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0117
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11239794

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - turned
Price upon request excl. VAT
Inquire
ID 151F0520

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0548

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 11,6 mm
  • Mounting flange
    4 Bolt - Special
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0566

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0117
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0646

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0658

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0664

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0695

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Viton O-rings
Price upon request excl. VAT
Inquire
ID 151F2206

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2213

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2220

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2222

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
  • Special features external 2
    Valve housing - without M10 threads
Price upon request excl. VAT
Inquire
ID 151F2295

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2314

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2322

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2330

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2338

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2365

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2374

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2383

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2401

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire