Do you need to replace a faulty component in the hydraulic system of your machine? Then you are in the right place! We have been in the market of hydraulics and hydraulic products for more than thirty years.

Our offer includes hydraulic directional control valves, hydraulic pumps, hydraulic motors and other components of the hydraulic system. We are the only certified distributor of the Danish manufacturer Danfoss Power Solutions in the Czech Republic and Slovakia, but we also represent other hydraulic components manufacturers and brands, such as White Drive Motors & Steering, a manufacturer of selected orbital hydraulic motors and hydraulic steering that were formerly produced by Danfoss.

In our extensive warehouse near Litovel, Czech Republic, we have more than 5,000 products ready for immediate delivery and our stock of hydraulic parts is constantly expanding. At the same time, we are part of a large European network of suppliers, which means that we are able to supply products that you will not find in our e-shop, including products of manufacturers that we do not represent.

Our experienced and trained team of hydraulics experts will gladly help you select the right product or component so that the hydraulic system of your machine works exactly as it should. Similarly, we will quickly check the availability and delivery time of goods that are currently not in stock.

In addition to distributing hydraulic parts, we also have long-term experience with designing complete system solutions for machines. Therefore, we can also advise you on assembling components into a larger working unit, from hydraulics and fluid conveyance to electronics and control software and even full machine electrification or hybrid drive system.

Default view
View parameters
ID 151F0518

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0546

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 11,6 mm
  • Mounting flange
    4 Bolt - Special
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0564

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0117
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0570

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bolts - special coated
  • Special features internal 1
    Output shaft - width of keyway
Price upon request excl. VAT
Inquire
ID 151F0595

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - spec surface roughness
Price upon request excl. VAT
Inquire
ID 151F0631

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Identical with 151F0511
Price upon request excl. VAT
Inquire
ID 151F0644

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F0650

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bolts - special coated
Price upon request excl. VAT
Inquire
ID 151F0693

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2204

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2211

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2218

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2304

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2312

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2320

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2328

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2336

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2354

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2363

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2372

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2381

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2399

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2408

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2417

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2419

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Valve housing - with drain port
Price upon request excl. VAT
Inquire
ID 151F3144

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151F5104

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151F5113

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Shaft seal
    NBR - Low pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features internal 1
    Shaft seal 72 NBR
Price upon request excl. VAT
Inquire
ID 11004153

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11005427

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Valve housing - with drain port
Price upon request excl. VAT
Inquire
ID 11006727

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11066150

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire