E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 151B3195

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Special - bearing housing
  • Drain port dimension
    2 x G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151B0127
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - extra drain port
  • Special features internal 1
    Balance plate - with back-up rings
  • Special features internal 2
    Standard output shaft
1 693,34 € excl. VAT
ID 151B3257

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 773,66 € excl. VAT
ID 11191762

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
1 869,47 € excl. VAT
ID 11215954

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - turned
1 854,98 € excl. VAT
ID 151B2168

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    1/2 x 1/2 x 2-1/4 inch (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 854,98 € excl. VAT
ID 151B2173

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 2-1/4" - 1 1/2-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    9/16 x 9/16 x 2 inch (SAE J501)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 904,30 € excl. VAT
ID 151B3118

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 854,98 € excl. VAT
ID 151B3123

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 854,98 € excl. VAT
ID 151B3194

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Disc valve - special design
1 854,98 € excl. VAT
ID 151B3196

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Special - bearing housing
  • Drain port dimension
    2 x G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151B0127
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - extra drain port
  • Special features internal 1
    Balance plate - with back-up rings
  • Special features internal 2
    Standard output shaft
1 976,71 € excl. VAT
ID 151B3258

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 872,52 € excl. VAT
ID 151B2169

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    1/2 x 1/2 x 2-1/4 inch (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 978,04 € excl. VAT
ID 151B2174

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 2-1/4" - 1 1/2-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    9/16 x 9/16 x 2 inch (SAE J501)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 027,36 € excl. VAT
ID 151B2181

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 995,54 € excl. VAT
ID 151B3119

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 978,04 € excl. VAT
ID 151B3124

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
1 978,04 € excl. VAT
ID 151B3172

On request
  • Basic motor
    OMVW
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 180 x 10,6 mm / 194 x 3,4 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Disc valve - special design
2 055,87 € excl. VAT
ID 11018191

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 088,80 € excl. VAT
ID 11015548

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Valve housing - with drain port
1 232,29 € excl. VAT
ID 11076088

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
1 197,34 € excl. VAT
ID 11111075

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
1 192,69 € excl. VAT
ID 11114878

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
1 191,96 € excl. VAT
ID 11178657

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features internal 1
    Nut - 28 pulses per rev.
1 192,05 € excl. VAT
ID 11223776

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,1 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Output shaft - shorter
1 171,28 € excl. VAT
ID 11238774

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (5 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features external 2
    Unpainted port surface
  • Special features internal 1
    Nut - 28 pulses per rev.
1 152,31 € excl. VAT
ID 151Z3010

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 152,31 € excl. VAT
ID 151Z3016

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 152,31 € excl. VAT
ID 151Z3020

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 171,28 € excl. VAT
ID 151Z3026

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 179,79 € excl. VAT
ID 151Z3030

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 160 x 9 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 191,23 € excl. VAT
ID 151Z3036

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 191,23 € excl. VAT
ID 151Z3070

On request
  • Basic motor
    TMT
  • Series
    T-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,1 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0176
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
1 171,28 € excl. VAT

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.