E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 151B3274

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Viton O-rings
2 413,16 € excl. VAT
ID 151B3300

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    800 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Cardan shaft - strengthen
2 413,16 € excl. VAT
ID 151B2132

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 404,56 € excl. VAT
ID 151B2191

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 404,56 € excl. VAT
ID 11177246

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Output shaft - shorter
2 382,20 € excl. VAT
ID 151B2186

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 382,20 € excl. VAT
ID 11159874

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
2 377,47 € excl. VAT
ID 151Z3055

In stock
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 22,1 mm - B.C. dia. 160,1 mm - Dia. M 16
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Brake release port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 358,77 € excl. VAT
ID 151Z3045

On request
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 22,1 mm - B.C. dia. 160,1 mm - Dia. M 16
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Brake release port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 339,16 € excl. VAT
ID 151Z3095

On request
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 12,5 mm - B.C. dia. 161,9 mm - Dia. 5/8-18 UNF
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Brake release port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 339,16 € excl. VAT
ID 151Z3115

On request
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 180 x 9 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Brake release port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 339,16 € excl. VAT
ID 151Z3135

On request
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 180 x 9 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    9/16 - 18 UNF
  • Brake release port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 339,16 € excl. VAT
ID 151B2163

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 2-1/4" - 1 1/2-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    9/16 x 9/16 x 2" (SAE J501)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 319,42 € excl. VAT
ID 151Z3125

In stock
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 180 x 9 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Brake release port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
2 312,37 € excl. VAT
ID 151B3321

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
2 297,49 € excl. VAT
ID 11053388

In stock
  • Basic motor
    TMTHW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Mounting flange dimension
    5 x M14x1,5 - BC 140 mm
  • Displacement
    630 cm³
  • Mounting thread dimension
    Pilot dia. 179,9 x 11,8 mm / 179,9 x 7,2 mm - B.C. dia. 210 mm - Dia. 14,2 mm
  • Mounting flange
    10 Bolt - Wheel
  • Port style
    Standard - end cover
  • Port dimension
    G 3/4
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11131621
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
2 292,33 € excl. VAT
ID 11081395

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - spec surface roughness
  • Special features internal 1
    Cardan shaft - strengthen
2 279,43 € excl. VAT
ID 151B2158

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 279,43 € excl. VAT
ID 151B3108

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 279,43 € excl. VAT
ID 11019262

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
2 275,13 € excl. VAT
ID 151B3309

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
2 275,13 € excl. VAT
ID 151B3319

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
2 275,13 € excl. VAT
ID 11065032

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Viton O-rings
2 263,52 € excl. VAT
ID 11198635

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
  • Special features internal 1
    Viton O-rings
2 263,52 € excl. VAT
ID 11008365

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 110 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Output shaft - longer
2 257,07 € excl. VAT
ID 11108318

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
2 257,07 € excl. VAT
ID 151B2153

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 2-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/2 x 1/2 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 257,07 € excl. VAT
ID 151B3103

In stock
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 50 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A14 x 9 x 70 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 257,07 € excl. VAT
ID 151B3113

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    630 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 60 mm - M42 x 3 tap
  • Mounting thread dimension
    Pilot dia. 160 x 11 mm - B.C. dia. 200 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B16 x 10 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M12)
  • Port dimension
    G 1
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 257,07 € excl. VAT
ID 11089435

On request
  • Basic motor
    TMTHW
  • Series
    T-series
  • Output shaft
    Thread hole flange
  • Mounting flange dimension
    6 x M16 - BC 170 mm
  • Displacement
    400 cm³
  • Mounting thread dimension
    Pilot dia. 223,9 x 5 mm / 223,9 x 5 mm - B.C. dia. 265 mm - Dia. 17,6 mm
  • Mounting flange
    8 Bolt - Wheel
  • Port style
    Standard - end cover
  • Port dimension
    G 3/4
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    11131621
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Painted
    Black
2 229,12 € excl. VAT
ID 11200853

On request
  • Basic motor
    TMT FL
  • Brake release port
    Standard mounting flange
  • Series
    T-series
  • Displacement
    500 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 180 x 9 mm - B.C. dia. 224 mm - Dia. 18 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 3/4
  • Drain port style
    Standard - motor flange
  • Drain port dimension
    G 1/4
  • Brake release port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151Z2059
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Painted
    Black - RAL 9005
2 197,86 € excl. VAT
ID 151B2190

On request
  • Basic motor
    OMV
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 16T
  • Shaft size
    Dia. 2-1/8" - 1/2-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 13,5 mm - B.C. dia. 161,9 mm - Dia. 17,5 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 5/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0129
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
2 160,32 € excl. VAT

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.