E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11208964

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209253

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209254

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209255

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight - CH 9,5 (.375)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209256

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11209257

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209258

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209259

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209260

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209380

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    69 bar [1000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209381

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11212149

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    173 bar [2500 psi] relief valve installed
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11212150

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11212151

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11212152

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11212153

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212154

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212155

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212156

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11212157

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual)
Price upon request excl. VAT
Inquire
ID 11212384

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212385

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11212386

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11212387

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    104 bar [1500 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual)
Price upon request excl. VAT
Inquire
ID 11199533

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199534

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199535

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199536

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200493

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11203086

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203224

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203245

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.