E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Where can I find the product ID?
Default view
View parameters
ID 11230218

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar (3000 psi) relief valve installed
Price upon request excl. VAT
Inquire
ID 83072589

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83072661

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11203461

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11206722

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206723

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar (2000 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206724

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11206725

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206726

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206727

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Valve function
    173 bar (2500 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206728

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206729

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206730

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206731

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206732

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206733

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11206734

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206735

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11206736

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar (2000 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206737

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Mounting thread dimension
    Pilot dia. 101,5 x 6,4 mm - B.C. dia. 127 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206738

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/2" - 1 1/8 -18 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Output shaft - with lock nut
Price upon request excl. VAT
Inquire
ID 11206739

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206740

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/2" - 1 1/8 -18 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Output shaft - with lock nut
Price upon request excl. VAT
Inquire
ID 11210540

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210541

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11210542

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210543

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Valve function
    173 bar (2500 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210544

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210545

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210546

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210547

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11210548

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.

Recently
viewed
ID 83095388

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 157B9022

In stock
  • Spool type
    PVB
  • Spool type
    PVBS
  • Symmetric flow
    Yes
  • A to T flow rate
    40 l/min
  • P to A flow rate
    40 l/min
  • B to T flow rate
    40 l/min
  • P to B flow rate
    40 l/min
  • Function in neutral position A
    Closed A
  • Function in neutral position B
    Closed B
  • Spool control type A
    Flow control A
  • Spool control type B
    Flow control B
  • PVBS check valve
    Check valve AB
  • Spool deadband
    1,5 mm
  • PVMR friction detent
    No
  • PVM type
    Yes
  • Hydraulic activation
    Yes
  • Spool characteristic
    Progressive
  • PVG type
    PVG 32
  • Related documents
    520L0344
54,40 € excl. VAT
ID 151B3056

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Front cover - special design
908,16 € excl. VAT
ID 11166859

On request
  • Function
    Proportional
  • Voltage
    11-32 V
  • Connector type
    AMP
  • Input signal
    Voltage signal
  • PVG type
    PVG 32, PVG 100
  • PVE type
    PVES
  • Series
    Series 7
  • Hydraulic ramp
    No
  • DI (direction indicator)
    No
  • EX certified
    No
  • Float position
    No
  • Fault monitoring
    Passive
  • IP rating
    IP66
  • Related documents
    BC218286485446en-000310
696,60 € excl. VAT
ID 83082451

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
  • Special features internal 1
    Motor - rotation CCW
Price upon request excl. VAT
Inquire
ID 11186137

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 1 " tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11229768

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    80 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire
ID 11034832

In stock
  • Function
    Proportional
  • Voltage
    11-32 V
  • Connector type
    Deutsch
  • Input signal
    PWM
  • PVG type
    PVG 32, PVG 100
  • PVE type
    PVEP
  • Series
    Series 4
  • Hydraulic ramp
    No
  • DI (direction indicator)
    No
  • EX certified
    No
  • Replaced by
    Not replaced
  • Float position
    No
  • Fault monitoring
    Active
  • IP rating
    IP67
  • Related documents
    520L0553
662,20 € excl. VAT
ID 11214554

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    230 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 30 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    ISO 9974-1, M22 x 1.5
  • Drain port style
    Standard - end cover
  • Drain port dimension
    ISO 9974-1, M14 x 1.5
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11186715

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    A8 x 7 x 32 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black - RAL 9005
Price upon request excl. VAT
Inquire