E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Where can I find the product ID?
Default view
View parameters
ID 11230218

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar (3000 psi) relief valve installed
Price upon request excl. VAT
Inquire
ID 83072589

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83072661

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11203461

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11206722

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206723

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar (2000 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206724

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11206725

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206726

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206727

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Valve function
    173 bar (2500 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206728

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206729

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206730

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206731

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206732

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206733

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11206734

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206735

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11206736

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar (2000 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206737

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Mounting thread dimension
    Pilot dia. 101,5 x 6,4 mm - B.C. dia. 127 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206738

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/2" - 1 1/8 -18 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Output shaft - with lock nut
Price upon request excl. VAT
Inquire
ID 11206739

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206740

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/2" - 1 1/8 -18 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Output shaft - with lock nut
Price upon request excl. VAT
Inquire
ID 11210540

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210541

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11210542

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210543

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Valve function
    173 bar (2500 psi) relief valve installed
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210544

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210545

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210546

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210547

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11210548

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    110 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.