E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

Orbital motors

Where can I find the product ID?
OML Orbital motors
OML Orbital motors
OMM Orbital motors
OMM Orbital motors
OMP X Orbital motors
OMP X Orbital motors
OMR X Orbital motors
OMR X Orbital motors
OMS Orbital motors
OMS Orbital motors
OMT Orbital motors
OMT Orbital motors
OMV Orbital motors
OMV Orbital motors
TMT Orbital motors
TMT Orbital motors
TMTHW Orbital motors
TMTHW Orbital motors
TMVW Orbital motors
TMVW Orbital motors
Default view
View parameters
ID 151B2051

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
19 830 Kč excl. VAT 23 994 Kč incl. VAT
ID 151B2057

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
20 150 Kč excl. VAT 24 382 Kč incl. VAT
ID 151B2063

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-3/4" - 1 1/4-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    7/16 x 7/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
19 930 Kč excl. VAT 24 115 Kč incl. VAT
ID 151B3001

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
22 095 Kč excl. VAT 26 735 Kč incl. VAT
ID 151B3013

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
20 490 Kč excl. VAT 24 793 Kč incl. VAT
ID 151B3019

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 151B3289

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
20 150 Kč excl. VAT 24 382 Kč incl. VAT
ID 151B3506

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Output shaft - shorter
20 150 Kč excl. VAT 24 382 Kč incl. VAT
ID 11007564

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bearing housing - hole for speed sensor
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 11033662

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-3/4" - 1 1/4-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    7/16 x 7/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
21 580 Kč excl. VAT 26 112 Kč incl. VAT
ID 11093519

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
  • Special features external 2
    Output shaft - shorter
23 360 Kč excl. VAT 28 266 Kč incl. VAT
ID 11115531

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 45 mm - M30 x 2 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B12 x 8 x 28 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features internal 1
    Viton O-rings
22 440 Kč excl. VAT 27 152 Kč incl. VAT
ID 11125052

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
21 430 Kč excl. VAT 25 930 Kč incl. VAT
ID 11159857

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
  • Special features internal 1
    ATEX certification
32 820 Kč excl. VAT 39 712 Kč incl. VAT
ID 11159863

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
  • Special features internal 1
    ATEX certification
33 130 Kč excl. VAT 40 087 Kč incl. VAT
ID 11161895

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Grey
  • Special features external 1
    Label - customer designed
21 540 Kč excl. VAT 26 063 Kč incl. VAT
ID 11165949

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 50 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Low pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Output shaft - shorter
  • Special features external 2
    Valve housing - turned left
  • Special features internal 1
    Shaft seal 72 NBR
24 900 Kč excl. VAT 30 129 Kč incl. VAT
ID 11170709

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 50 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Low pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Output shaft - shorter
  • Special features external 2
    Valve housing - turned right
  • Special features internal 1
    Shaft seal 72 NBR
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 11171414

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Label - customer designed
21 790 Kč excl. VAT 26 366 Kč incl. VAT
ID 11192101

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Valve housing - spec surface roughness
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 11198321

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 11201120

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
21 430 Kč excl. VAT 25 930 Kč incl. VAT
ID 11229973

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
22 730 Kč excl. VAT 27 503 Kč incl. VAT
ID 151B0362

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features internal 1
    Valve drive - noise optimized (CW)
21 120 Kč excl. VAT 25 555 Kč incl. VAT
ID 151B0387

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Output shaft - shorter
23 360 Kč excl. VAT 28 266 Kč incl. VAT
ID 151B0388

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 50 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Output shaft - shorter
24 900 Kč excl. VAT 30 129 Kč incl. VAT
ID 151B0389

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
21 750 Kč excl. VAT 26 318 Kč incl. VAT
ID 151B0406

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
21 750 Kč excl. VAT 26 318 Kč incl. VAT
ID 151B0407

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
25 560 Kč excl. VAT 30 928 Kč incl. VAT
ID 151B0410

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 40 mm - M12 tap
  • Mounting thread dimension
    Pilot dia. 125 x 9 mm - B.C. dia. 160 mm - Dia. 14 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A12 x 8 x 70 mm
  • Port style
    Side ported - offset manifold (4 x M10)
  • Port dimension
    G 3/4
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
21 430 Kč excl. VAT 25 930 Kč incl. VAT
ID 151B2047

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 17T
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0161
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Output shaft - shorter
21 430 Kč excl. VAT 25 930 Kč incl. VAT
ID 151B2052

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/2" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    3/8 x 3/8 x 2-1/4" (B.S. 46)
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
21 120 Kč excl. VAT 25 555 Kč incl. VAT

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.