E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Orbital motors

Where can I find the product ID?
OML Orbital motors
OML Orbital motors
OMM Orbital motors
OMM Orbital motors
OMP X Orbital motors
OMP X Orbital motors
OMR X Orbital motors
OMR X Orbital motors
OMS Orbital motors
OMS Orbital motors
OMT Orbital motors
OMT Orbital motors
OMV Orbital motors
OMV Orbital motors
TMT Orbital motors
TMT Orbital motors
TMTHW Orbital motors
TMTHW Orbital motors
TMVW Orbital motors
TMVW Orbital motors
Default view
View parameters
ID 151F2399

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2408

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2417

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151F2419

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Valve housing - with drain port
Price upon request excl. VAT
Inquire
ID 151F3144

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151F5104

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151F5113

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Shaft seal
    NBR - Low pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features internal 1
    Shaft seal 72 NBR
Price upon request excl. VAT
Inquire
ID 11004153

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11005427

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    No
  • Special features external 1
    Valve housing - with drain port
Price upon request excl. VAT
Inquire
ID 11006727

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11066150

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11087658

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
  • Special features external 2
    Bolts - special coated
Price upon request excl. VAT
Inquire
ID 11095901

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Motor flange - hole for speed sensor
  • Special features external 2
    Bolts - special coated
  • Special features internal 2
    Output shaft - width of keyway
Price upon request excl. VAT
Inquire
ID 11114094

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11116455

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11126590

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11129139

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11133803

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    PTO
  • Shaft size
    Dia. 1-3/8" tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0117
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Bolts - special coated
Price upon request excl. VAT
Inquire
ID 11137224

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11159824

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
  • Special features internal 1
    ATEX certification
Price upon request excl. VAT
Inquire
ID 11159833

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Label - ATEX
  • Special features internal 1
    ATEX certification
Price upon request excl. VAT
Inquire
ID 11160239

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 35 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    B6 x 6 x 20 mm (DIN 6885)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bolts - special coated
Price upon request excl. VAT
Inquire
ID 11168341

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11174123

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11179691

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11181972

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Special features external 1
    Bolts - special coated
  • Special features external 2
    Label - ATEX
  • Special features internal 1
    Output shaft - width of keyway
Price upon request excl. VAT
Inquire
ID 11188274

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - Standard
  • Seal kit product ID
    151F0109
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11189375

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11193861

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    151F0140
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11197179

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,1 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11224914

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Shaft key
    5/16 x 5/16 x 1-1/4" (B.S. 46)
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11226382

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Shaft key
    A10 x 8 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.