E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11189664

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11194987

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11194988

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11194989

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199437

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199438

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199439

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199440

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199441

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199442

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    25 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199443

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199444

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. M10
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    End ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199445

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199446

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199447

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199448

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199449

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199450

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199451

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199452

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199453

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199454

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199455

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 25 mm - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199456

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199457

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199458

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    60 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199459

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    60 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199460

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    80 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199461

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    80 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199462

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    80 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199463

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    80 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199464

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    80 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 25 mm - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.