Do you need to replace a faulty component in the hydraulic system of your machine? Then you are in the right place! We have been in the market of hydraulics and hydraulic products for more than thirty years.

Our offer includes hydraulic directional control valves, hydraulic pumps, hydraulic motors and other components of the hydraulic system. We are the only certified distributor of the Danish manufacturer Danfoss Power Solutions in the Czech Republic and Slovakia, but we also represent other hydraulic components manufacturers and brands, such as White Drive Motors & Steering, a manufacturer of selected orbital hydraulic motors and hydraulic steering that were formerly produced by Danfoss.

In our extensive warehouse near Litovel, Czech Republic, we have more than 5,000 products ready for immediate delivery and our stock of hydraulic parts is constantly expanding. At the same time, we are part of a large European network of suppliers, which means that we are able to supply products that you will not find in our e-shop, including products of manufacturers that we do not represent.

Our experienced and trained team of hydraulics experts will gladly help you select the right product or component so that the hydraulic system of your machine works exactly as it should. Similarly, we will quickly check the availability and delivery time of goods that are currently not in stock.

In addition to distributing hydraulic parts, we also have long-term experience with designing complete system solutions for machines. Therefore, we can also advise you on assembling components into a larger working unit, from hydraulics and fluid conveyance to electronics and control software and even full machine electrification or hybrid drive system.

Default view
View parameters
Replaced
ID 151-0701

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185560
Replaced
ID 151-0451

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185539
Replaced
ID 151-0421

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185585
Replaced
ID 151-0411

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11186671
Replaced
ID 151-0401

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185560
Replaced
ID 151-0266

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185610
Replaced
ID 11130232

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185465
Replaced
ID 11086311

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185587
Replaced
ID 11003721

Product discontinued
  • Basic motor
    OMR
  • Displacement
    80 cm³
  • Replaced by
    11185465
ID 151G2002

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2022

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2023

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2024

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2001

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2021

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2035

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11016755

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0024

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0027

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0031

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0034

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    Side ported - offset
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0090

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0244

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151G0247

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 151G0251

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
  • Special features internal
    Output shaft - special surface treatment
Price upon request excl. VAT
Inquire
ID 151G0255

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
  • Special features internal
    Output shaft - special surface treatment
Price upon request excl. VAT
Inquire
ID 11269810

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0015

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M8
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0025

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0032

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0035

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    Side ported - offset
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0039

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M8
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire