E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 151G2001

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2002

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2003

In stock
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2004

In stock
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2021

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2022

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2023

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2024

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 " - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. 10-32 UNF
  • Mounting flange
    A4
  • Shaft key
    3/16 x 3/16 x 3/4 "
  • Port style
    End ported - aligned
  • Port dimension
    7/16-20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 151G2035

On request
  • Basic motor
    OML
  • Series
    O-series
  • Displacement
    8 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 45 x 5,3 mm - B.C. dia. 36 mm - Dia. M5
  • Mounting flange
    A4
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Seal kit product ID
    151G2201
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11016755

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 11269810

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0002

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0003

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0004

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0005

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0006

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0013

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0015

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M8
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0024

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0025

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0026

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0027

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0028

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0029

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Splined - 9T
  • Shaft size
    Dia. 16,5 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    N/A
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0031

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0032

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0033

In stock
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    End ported - aligned
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0034

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    12,5 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    Side ported - offset
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0035

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    Side ported - offset
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0036

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    32 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 5/8 ″ - 1/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. 1/4-28 UNF
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    3/16 x 3/16 x 3/4 ″
  • Port style
    Side ported - offset
  • Port dimension
    9/16 - 18 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    3/8 - 24 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0037

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    50 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M6
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    End ported - aligned
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire
ID 151G0039

On request
  • Basic motor
    OMM
  • Series
    O-series
  • Displacement
    20 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 16 mm - M6 tap
  • Mounting thread dimension
    Pilot dia. 31,5 x 5 mm - B.C. dia. 45 mm - Dia. M8
  • Mounting flange
    3 Bolt - Round (3 x M6)
  • Shaft key
    A5 x 5 x 16 mm (DIN 6885)
  • Port style
    Side ported - offset
  • Port dimension
    G 3/8
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/8
  • Dust seal
    Standard
  • Shaft seal
    NBR - Standard
  • Seal kit product ID
    151G0202
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    No
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.

Recently
viewed
Replaced
ID 151-2387

Product discontinued
  • Basic motor
    DS
  • Displacement
    250 cm³
  • Replaced by
    11186187
Go to replacement
ID 11212851

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    90 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11186145

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
SNP2NN-/-025-L-N-A6-SA-P1-B7-B5-YY-N-N-/-NNN-

In stock
  • Group
    Gr 2
  • Rotation
    Left (counterclockwise)
  • Displacement
    25 cm³
  • Shaft style
    Splined SAE J498 - 9T
  • Port type
    German std, X pattern
  • Rated pressure
    160 bar
  • Maximum speed
    3000 rev./min
  • Theoretical flow at max. speed
    75,6 l/min
  • Mounting flange
    SAE A, Pilot dia. 82,55 mm, 2-bolt, B.C. dia. 106,4 mm, O-ring
4 446 Kč excl. VAT 5 380 Kč incl. VAT
ID 11212129

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    90 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual)
Price upon request excl. VAT
Inquire
ID 150-1078

On request
  • Circuit type
    LS
  • P - T - L - R port size
    3/4"-16 UNF O-ring
  • LS - EL - E port size
    7/16-20 UNF O-ring D=21 placed in boss
  • Column thread size
    3/8"-16 UNC
  • Valve set
    (---,---,-,-)
  • Housing product ID
    150-0676
  • Spool sleeve set product ID
    150-7477
  • Spool sleeve set comments
    Static, 10°
  • Neutral spring set product ID
    150-4209
  • Series
    OSPBX
  • Displacement
    160 cm³
  • Seal kit product ID
    150N4040
Price upon request excl. VAT
Inquire
ID 151F2403

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    500 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 9,5 mm - B.C. dia. 146,1 mm - Dia. 14,4 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
SNP2NN-/-4,0-R-N-A6-SA-P1-B6-B5-YY-N-A-/-NNN-

In stock
  • Group
    Gr 2
  • Rotation
    Right (clockwise)
  • Displacement
    4 cm³
  • Shaft style
    Splined SAE J498 - 9T
  • Port type
    German std, X pattern
  • Rated pressure
    250 bar
  • Maximum speed
    4000 rev./min
  • Theoretical flow at max. speed
    15,6 l/min
  • Mounting flange
    SAE A, Pilot dia. 82,55 mm, 2-bolt, B.C. dia. 106,4 mm, O-ring
3 744 Kč excl. VAT 4 530 Kč incl. VAT
ID 151F2350

On request
  • Basic motor
    OMS
  • Series
    O-series
  • Displacement
    80 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    6 Bolt - Magneto
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - mounting flange
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151F0111
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
Replaced
ID 11126059

Product discontinued
  • Basic motor
    OMP
  • Displacement
    32 cm³
  • Replaced by
    11185832
Go to replacement