E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11200441

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200442

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200443

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
  • Special features external 2
    Motor housing - back of mounting flange milled flat
Price upon request excl. VAT
Inquire
ID 11200444

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11203227

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203600

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203672

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203711

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203721

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
  • Special features external 3
    Motor housing with groove for speed sensor option
Price upon request excl. VAT
Inquire
ID 11203827

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11203828

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203987

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203988

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11204476

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204477

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204478

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204479

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204480

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11204481

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11204482

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204483

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11204484

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204485

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204486

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204487

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204488

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204489

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 19 mm - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned
  • Port dimension
    3/4 - 16 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204490

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight - CH 9,5 (.375)
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11204491

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11204492

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11208923

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 3 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
  • Special features external 3
    Motor housing with groove for speed sensor option
Price upon request excl. VAT
Inquire
ID 11208924

On request
  • Basic motor
    WP 155 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 3 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
  • Special features external 3
    Motor housing with groove for speed sensor option
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.