E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
Kč

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11208951

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208952

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11208953

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208954

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    173 bar [2500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11208955

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar [3000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11208956

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual)
Price upon request excl. VAT
Inquire
ID 11208957

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208958

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    207 bar [3000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11208959

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar [2000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11208960

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    138 bar [2000 psi] relief valve installed
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual) weatherpack
Price upon request excl. VAT
Inquire
ID 11208961

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208962

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    290 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208963

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    69 bar [1000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11208964

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    320 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11208965

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (dual)
Price upon request excl. VAT
Inquire
ID 11208966

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    400 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 3-pin male weatherpack connector (single) 50 pulse
Price upon request excl. VAT
Inquire
ID 11209145

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11209146

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209147

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209148

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209149

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1" - 3/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    3/16 x 3/16 x 7/8"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209150

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209151

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209152

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209153

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209154

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209155

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11209156

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1" - 3/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    3/16 x 3/16 x 7/8"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209157

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1" - 3/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209158

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    40 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209159

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    50 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11209160

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    60 cm³
  • Shaft style
    Straight - CH 10,3 (.406)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.