E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11199596

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199597

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199598

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199599

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199600

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199601

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199602

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199603

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight - CH 9,5 (.375)
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199604

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199605

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199606

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199607

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11199608

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199609

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11199610

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200304

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200305

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200306

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1" - 3/4-28 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    3/16 x 3/16 x 7/8"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200307

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200308

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. M10
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200510

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    Valve cavity only
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200511

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11200512

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200513

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200514

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200515

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11200516

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. M10
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203324

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203729

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11203782

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11203983

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    173 bar [2500 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11204030

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset (valve cavity)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    69 bar [1000 psi] relief valve installed
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.