E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11209361

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209362

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11209363

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,7 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 2
    Speed sensor - 4 pin male M12 connector (single)
Price upon request excl. VAT
Inquire
ID 11212130

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214135

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214136

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214137

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214138

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214139

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214141

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214144

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11214146

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214147

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214148

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214149

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - aligned manifold (4 x 5/16-18 UNC)
  • Port dimension
    Dia. 12,7 [1/2"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214150

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214151

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214152

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214153

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    FPM (viton) - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214154

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPT
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214155

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,1 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x 5/16-18 UNC)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214156

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214157

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214158

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214160

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214161

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214162

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214163

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214166

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,4 x 5,2 mm - B.C. dia. 106,4 mm - Dia. 13,5 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painting - total port surface unpainted
Price upon request excl. VAT
Inquire
ID 11214168

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,5 x 2,7 mm - B.C. dia. 146,1 mm - Dia. 13,1 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214170

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Splined - 13T
  • Shaft size
    Dia. 7/8" - 5/16-18 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,5 x 2,7 mm - B.C. dia. 146,1 mm - Dia. 13,1 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire
ID 11214171

On request
  • Basic motor
    WR 255 Series
  • Series
    W-series
  • Displacement
    100 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 25 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 101,5 x 2,7 mm - B.C. dia. 146,1 mm - Dia. 13,1 mm
  • Mounting flange
    2 Bolt - B
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Journal bearing
  • Rear bearing
    Journal bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.