• ID157B4032
  • Manufacturer Danfoss
  • Input signal Voltage signal
  • PVG type PVG 32, PVG 100
  • Voltage 11-32 V
  • Function Proportional
  • Connector type Hirschmann (DIN)
  • Nahrazeno produktem 11166817
Product discontinued – replacement available
Replacement for Actuator PVEH 11-32V Hirschmann
Actuator PVEH 11-32V Hirschmann
Actuator PVEH 11-32V Hirschmann Product ID: 11166817
In stock
12 950 Kč excl. VAT
This product is a fully adequate replacement of the discontinued product. It has identical parameters, which means that these products are interchangeable.
Old product versions
Actuator PVEH 12V Hirschmann
Actuator PVEH 12V Hirschmann Product ID: 157B4016
Product has been replaced
Actuator PVEH 24V Hirschmann
Actuator PVEH 24V Hirschmann Product ID: 157B4028
Product has been replaced
This product is no longer available. It has been replaced by a new version , which is its fully adequate replacement with identical parameters. Therefore, it is possible to replace the original product with the new one.
Need help?

Product description

Electrohydraulic PVE actuator for precise control of Danfoss PVG 32 and PVG 100 valves.

This product has been discontinued and replaced by a Series 7 PVE actuator. Please select related product, which is an adequate replacement of this obsolete part.

 

Details

Function Proportional
Voltage 11-32 V
Connector type Hirschmann (DIN)
Input signal Voltage signal
PVG type PVG 32, PVG 100
PVE type PVEH
Series Series 4
Hydraulic ramp No
DI (direction indicator) No
Replaced by 11166817
Float position No
Fault monitoring Active
IP rating IP65
Related documents 520L0553
Weight (brutto) 1000 g
Recently
viewed
Replaced
ID 157B4032

Product discontinued
  • Function
    Proportional
  • Voltage
    11-32 V
  • Connector type
    Hirschmann (DIN)
  • Input signal
    Voltage signal
  • PVG type
    PVG 32, PVG 100
  • PVE type
    PVEH
  • Series
    Series 4
  • Hydraulic ramp
    No
  • DI (direction indicator)
    No
  • Replaced by
    11166817
  • Float position
    No
  • Fault monitoring
    Active
  • IP rating
    IP65
  • Related documents
    520L0553
ID 83100660

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    1/4 x 1/4 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185715

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    160 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,6 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
Replaced
ID 151-2000

Product discontinued
  • Basic motor
    DH
  • Displacement
    36 cm³
  • Replaced by
    11186086
ID 157B6200

On request
  • PVB A port size
    G1/2
  • PVB shock valves A and B facility
    No
  • LS-AB relief valve
    No
  • PVB type
    PVB
  • Port connection
    BSP
  • Load drop check valve
    Yes
  • Compensator valve
    Yes
  • Damped compensation valve
    No
  • Bleed down compensator
    No
  • T0 facility
    No
  • PVG type
    PVG 32
  • Related documents
    520L0344
8 645 Kč excl. VAT 10 460 Kč incl. VAT
ID 151B2065

On request
  • Basic motor
    OMT
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-3/4" - 1 1/4-18 UNF tap
  • Mounting thread dimension
    Pilot dia. 127 x 9 mm - B.C. dia. 161,9 mm - Dia. 14,4 mm
  • Mounting flange
    4 Bolt - C
  • Shaft key
    7/16 x 7/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - bearing housing
  • Drain port dimension
    9/16 - 18 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Seal kit product ID
    151B0113
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
23 170 Kč excl. VAT 28 036 Kč incl. VAT
ID 11186128

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    250 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Shaft key
    Woodruff key 1/4 x 1 inch (SAE J502)
  • Port style
    Side ported - offset
  • Port dimension
    1/2 - 14 NPTF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11185610

On request
  • Basic motor
    OMR X
  • Series
    O-series
  • Displacement
    80 cm³
  • Shaft style
    Tapered - Cone 1:10
  • Shaft size
    Dia. 28,5 mm - M20 x 1,5 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    B5 x 5 x 14 mm
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 83062992

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    80 cm³
  • Shaft style
    Straight - CH 8,0 (.315)
  • Shaft size
    Dia. 1 " tap
  • Mounting thread dimension
    Pilot dia. 44,4 x 2,6 mm - B.C. dia. 82,6 mm - Dia. 3/8-16 UNC
  • Mounting flange
    A4
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11186728

On request
  • Basic motor
    OMP X
  • Series
    O-series
  • Displacement
    315 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1 " - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 8 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1-1/4 "
  • Port style
    Side ported - offset manifold (4 x M8)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    HNBR - High pressure
  • Seal kit product ID
    11188319
  • Front bearing
    Needle roller bearing
  • Rear bearing
    Needle roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire