E-shop
+420 739 290 046 (Mon-Fri 8am-4pm CET)
eshop@technotrade.cz
CZE
€

Hydraulic motors

Where can I find the product ID?
Orbital motors
Orbital motors
Default view
View parameters
ID 11206849

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11206850

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206851

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206852

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 101,6 x 6,4 mm - B.C. dia. 146,1 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - B
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206853

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Mounting thread dimension
    Pilot dia. 101,5 x 6,4 mm - B.C. dia. 127 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Short
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Gear wheel set
    Standard
  • Check valve
    Yes
Price upon request excl. VAT
Inquire
ID 11206854

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206855

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206856

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11206857

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/2" - 1 1/8 -18 UNF tap
  • Mounting thread dimension
    Pilot dia. 107,7 x 6,4 mm - B.C. dia. 147,6 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Wheel
  • Shaft key
    8 x 7 x 31,5 mm
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11208997

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210596

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210597

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210598

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210599

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Valve function
    69 bar (1000 psi) relief valve installed
Price upon request excl. VAT
Inquire
ID 11210600

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210601

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210602

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Tapered - Cone 1:8
  • Shaft size
    Dia. 1-1/4" - 1-20 UNF tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
  • Special features external 2
    Bearing housing - rotated 90 deg CW seen from endcover
Price upon request excl. VAT
Inquire
ID 11210603

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210604

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight - CH 12,7 (.500)
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210605

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    Side ported - offset
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210606

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - offset manifold (2 x M10)
  • Port dimension
    G 1/2
  • Drain port style
    Standard - end cover
  • Drain port dimension
    G 1/4
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11210607

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    1/4 x 1/4 x 1"
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210608

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - 180° opposed
  • Port dimension
    1 1/16 - 12 UN
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210609

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11210610

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    2 Bolt - A
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset manifold (3 x 3/8-16 UNC)
  • Port dimension
    A: Dia. 12,7 [0.500"] & B: Dia. 15,9 [0.625"] drilled
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface & unpainted port surface
Price upon request excl. VAT
Inquire
ID 11210611

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210612

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 6B
  • Shaft size
    Dia. 1" - 1/4-20 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Free running
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210613

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210614

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Integrated in shaft seal plus seal guard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Grey
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210615

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Splined - 14T
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 2,7 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Magneto
  • Port style
    Side ported - offset
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210616

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 1-1/4" - 3/8-16 UNC tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    5/16 x 5/16 x 1-1/4"
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire
ID 11210617

On request
  • Basic motor
    WS 350
  • Series
    W-series
  • Displacement
    200 cm³
  • Shaft style
    Straight
  • Shaft size
    Dia. 32 mm - M8 tap
  • Mounting thread dimension
    Pilot dia. 82,5 x 6,4 mm - B.C. dia. 106,4 mm - Dia. 13,6 mm
  • Mounting flange
    4 Bolt - Square
  • Shaft key
    10 x 10 x 45 mm
  • Port style
    End ported - aligned
  • Port dimension
    7/8 - 14 UNF
  • Drain port style
    Standard - end cover
  • Drain port dimension
    7/16 - 20 UNF
  • Dust seal
    Standard
  • Shaft seal
    NBR - High pressure
  • Front bearing
    Tapered roller bearing
  • Rear bearing
    Tapered roller bearing
  • Gear wheel set
    Standard
  • Check valve
    Yes
  • Painted
    Black
  • Special features external 1
    Painted mounting surface
Price upon request excl. VAT
Inquire

Wide range of products
More than 5 000 items in stock inventory ready to be shipped.

Fast delivery
Products in stock are shipped next working day the latest.

Experts in hydraulics
We have been in business for more than 30 years.

Professional advice
Our experienced team will help you choose the best product.

Qualified repair service
Your machine or components will be in good hands with us.

Best quality guarantee
We are authorized distributor of Danfoss Power Solutions.

Product not found?
We can check availability of any product listed in our shop.

Machines are at our core
We design system solutions and control software for machinery.